Voltage Regulator
GA824
Test notes: Regulators with "AUX" terminal - regulator signal output terminal to control an auxiliary relay in addition to the lamp. To observe this control, connect the auxiliary lamp (LA01) supplied with the Tester between the orange and black tips of the cable harness (RM01). Before performing the test, the Tester's pilot lamp will light up and the auxiliary lamp (LA01) will remain off. During the test, the pilot lamp should turn off and the auxiliary lamp (LA01) should light up. Perform the test without connecting the "Computer" terminal (C) and the set point should be as indicated on set point. When connecting the "Computer" terminal to ground (black), the set point should drop to 12.6 Volts.
Set Point: 14,5
